- Before starting up, wipe the screen with a dry cloth every day;
- Water droplets or drinks on the screen will cause the software to stop responding, because water droplets and fingers have similar characteristics and need to be wiped off;
- The touch screen controller can automatically determine the dust, but too much dust will reduce the sensitivity of the touch screen, just wipe the screen with a dry cloth;
- Use a glass cleaner to clean dirty fingerprints and grease on the touch screen;
- Turn on and off the power in strict accordance with the rules, that is, the order to turn on the power is display, audio, host, and turn off the power in the opposite order;
- A large number of temporary files will be generated on the hard disk. If you often breakpoint or close without exiting the window, it will soon cause hard disk errors, so you need to run scandisk regularly to scan hard disk errors. It is best to set the secret mode to exit the application program and power off Windows, such as clicking corners in a specified order;
- The pure touch screen program of the industrial display does not need the mouse cursor, and the cursor will only attract the user’s attention;
- You should choose the simplest anti-mouse mode technical support that is most suitable for the application, because complex modes need to sacrifice delay and system resources;
- Depending on the harsh environment, regularly open the machine head to clean the reflective stripes and inner surface of the touch screen. The specific method is to open the cover on both sides of the machine, and you can find the mechanism that loosens the lock tongue at the front of the machine head, and open the mechanism. The latch is released.
Lift the front of the machine head, you can see the touch screen control card, unplug the touch screen cable, move the machine head back to remove the machine head and touch screen, carefully look at the method of fixing the touch screen, remove the touch screen to clean, be careful not to use hard paper Or hard cloth, do not scratch the reflective stripes, and finally restore the machine head in reverse order and original structure.